100 GPM General Fluid Transfer Pump – Tri-Rotor Model 100C

  • Tri-Rotor Solid Head Pump Model 100C
Click image to enlarge
Tri-Rotor Pump model 100C, which shares common components with model 80B and model 120A, is in the second to largest family of Tri-Rotor solid head pumps that provide constant flow rates.  This pump is perfect for simple fluid transfer such as loading and unloading drums, totes, tanks, and trailers.  The pump serves a wide range of industrial markets and applications.  Examples of the 100C model’s diverse applications include pumping No. 6 fuel oil, shear sensitive fluid, sugar slurry, solvent (recovery), peanut butter, pet food, and crankcase drain oil.

The pump is designed with side suction and top discharge flanged ports and is available in both clockwise (CW) and counterclockwise (CCW) rotations for pump installation flexibility.  Materials of construction for the 100C model include Iron Fitted, All Iron, Bronze Fitted, or All Bronze configurations.  Two drain plugs, located on the shaft housing, are provided with every pump.

Specifications of Tri-Rotor Pump Model 100C:
  • Flow rate:  19 to 102 GPM
  • Viscosity range:  4 to 21,625 cPs (40 to 100,000 SSU)
  • Inlet and Discharge Port size:  3” Flanged Ports
  • Operating temperature range:  -40 °F to 650 °F
  • Maximum operating pressure:  125 PSI
  • Pump displacement per revolution:  0.148 gal/rev
  • Pump speed range:  125 to 690 RPM
  • Solids passage available:  0.037 in.
Do you know your system parameters and would like us to quote the best pump model?  Please fill out the Pump Systems & Analysis Sheet.
Configure Your 100C Solid Head Pump
Part Number:
100C
Required Fields marked with
Quantity:
We Also Recommend
 
As with all Tri-Rotor pump models, the 100C is available with a Steam Jacketed option for fluids requiring to be heated or cooled in order to be pumped.  Tri-Rotor also offers an interesting option for its’ 100C solid head design: a Reduced Stroke Pump Head.  With this option, the pump can be designed to target a specific flow rate at a percentage of full flow.
 
Other Options for Pump Model 100C:
  • Other Materials of Construction options:
    • Shaft:  Steel (std.), Stainless Steel, or Hardened Stainless Steel
    • Piston:  Iron (std.), Bronze, or Steel
    • Body Gasket options:
      • Standard  {to 250 °F (121 °C)}
      • Heat Resistant  {to 650 °F (345 °C)}
  • Shaft length:  “M” (15-1/4”) (std.), “T” (12-3/4”), “MO” (15-1/4”), or “BD” (15-1/4”)
  • Shaft seal and lubrication:
    • Packing options (grease fitting provided):
    • Teflon Impregnated Packing (std.)  {to 550 °F (288 °C)}
    • FDA Food Grade (PTFE) Packing  {to 500 °F (260 °C)}
    • Heat Packing  {to 650 oF (345 °C)}
    • Zero-Leak #3 (Beaded) Packing  {-40 °F to 500 °F (-40 °C to 260 °C)}
    • Zero-Leak #30 (Non-Beaded) Packing  {-40 °F to 500 °F (-40 °C to 260 °C)}
  • Mechanical seal options (oil cup provided):
    • Type 1 Mechanical Seal – Viton  {-40 °F to 300 °F (-40 °C to 150 °C)}
    • Type 1 Mechanical Seal – Buna  {10 °F to 180 °F (-10 °C to 80 °C)}
  • Shuttle design:  Block (std.) or Formed
  • Relieved Rotor Group (for higher viscosities: >10,000 SSU/2,150 cPs)
  • Sanitary Preparation of pump internal components for food applications
  • Grease feeder available for shaft lubrication on pumps with packing
  • Exterior Protection:  Orange Paint (std.), Black Paint, White Lacquer, or 316SS Epoxy Coating
The bare weight of the pump is approximately 115 lbs.  The estimated shipping weight is 148 lbs.
 
Besides offering just a bare pump only for the Model 100C, Tri-Rotor offers a complete mounted pump system, including motor drive assembly and mounting.  Replacement parts for all Series 100 pumps can be found here.