Tri-Rotor Pump model 80B, which shares common components with model 100C
and model 120A
, is in the second to largest family of Tri-Rotor solid head pumps
that provide constant flow rates. This relatively low cost pump is perfect for simple fluid transfer such as loading and unloading drums, totes, tanks, and trailers. The pump serves a wide range of industrial markets and applications
. Examples of the 80B model’s diverse applications include pumping DTE lube oil, 500 oF asphalt, lime slurry, brine sludge, defoamer, dirty gear oil, grease slurry, ink oil, and animal fat.
The pump, available in both clockwise (CW) and counterclockwise (CCW) rotations, is designed with two threaded suction ports (side and top) and two threaded discharge ports (side and top) for the ultimate in installation flexibility. Standard configuration is side suction and top discharge. The other two ports are plugged with easily-moved pipe plugs. One of these unique pumps could even be installed to deliver two different compatible fluids to two different locations. Materials of construction
for the 80B model include Iron Fitted, All Iron, Bronze Fitted, or All Bronze configurations. Two drain plugs, located on the shaft housing, are provided with every pump.
Specifications of the Tri-Rotor Solid Head Pump Model 80B:
- Flow rate: 15 to 88 GPM
- Viscosity range: 4 to 21,625 cPs (40 to 100,000 SSU)
- Inlet and Discharge Port size: 2” NPT Ports
- Operating temperature range: -40 °F to 650 °F
- Maximum operating pressure: 125 PSI
- Pump displacement per revolution: 0.148 gal/rev
- Pump speed range: 100 to 600 RPM
- Solids passage available: 0.037 in.
Do you know your system parameters and would like us to quote the best pump model? Please fill out the Pump Systems & Analysis Sheet